Setting up the Victony WiFi Extender setup is a quick and straightforward process. Start by plugging the extender into a power outlet near your existing WiFi router. Wait for the power indicator to turn solid. Then, using a smartphone or computer, connect to the Victony_ext network in your device’s WiFi settings. Open a web browser and enter “192.168.10.1” in the address bar. This will take you to the extender’s setup age. Follow the on-screen instructions to select and connect to your home WiFi network. Enter your WiFi password when prompted. Once connected, you can unplug the extender and place it in an optimal location where it can boost your WiFi signal effectively. The Victony WiFi Extender is now set up, providing extended coverage for a stronger and more reliable wireless connection.
How can I manually set up the Victony WiFi extender?
- Connect the Victony WiFi Extender to a power outlet near your existing WiFi router. Wait for the power indicator to stabilise.
- On your computer or mobile device, go to the WiFi settings and connect to the Victony_ext network
- Open a web browser and enter the default IP address of the extender in the address bar. This is often “192.168.10.1,” but check your user manual for the correct IP address.
- Enter the login credentials when prompted. The default username and password are typically provided in the user manual. If you’ve changed these previously, use the updated credentials.
- Once logged in, you’ll likely see a setup wizard or configuration page
- Follow the on-screen instructions to select your home WiFi network from the list and enter the WiFi password.
- After configuring the WiFi settings, save or apply the changes. The extender may need to reboot.
- Once the extender has restarted, disconnect from the “Victony_ext” network and reconnect to your home WiFi network using the extended network name (SSID) and password.
- Place the Victony WiFi Extender in a location where it can effectively amplify the WiFi signal from your router. It’s recommended to position it within the range of your existing WiFi network for optimal performance.
- Verify that your devices are now connected to the extended WiFi network. You should experience improved coverage and signal strength
NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.
How do I set up my WPS Wi-Fi extender?
- Plug your WiFi extender into a power outlet near your existing WiFi router. Ensure that the extender is powered on, and wait for it to initialiseFind the WPS button on your WiFi extender.
- This button is usually labelled “WPS,” but it may vary depending on the extender model. Consult your extender’s user manual if you’re unsure..
- Press and hold the WPS button on the extender for a few seconds. The WPS LED indicator on the extender should start blinking.
- Within a couple of minutes of pressing the WPS button on the extender, go to your WiFi router and locate its WPS button. Press the WPS button on your router, usually for about 2 minutes.
- The WPS LED on the extender should become solid, indicating a successful connection. This process may take a couple of minutes.
- Once the connection is established, unplug the WiFi extender and place it in an optimal location within the range of your existing WiFi network.
- After placing the extender, connect your devices to the extended WiFi network. The extended network typically has the same name as your existing WiFi network, followed by “_EXT” or a similar identifier.
Update the firmware on your Victory WiFi extender.?
- Find your extender’s current firmware version in the settings.
- Visit Victony’s official website, download the latest firmware for your model.
- Ensure your device is connected to the extender.
- Open a web browser, enter the extender’s IP address (e.g., 192.168.10.1).
- Enter login credentials (default in the manual).
- Locate the “Firmware Update” section in the interface.
- Browse and select the downloaded firmware file.
- Initiate the update and wait for completion; the extender may restart.
- Log in again to confirm the updated firmware version.
How do you log into a WiFi extender?
- Join the WiFi network of your extender on your device.
- Launch a web browser.
- Enter the extender’s IP address (e.g., 192.168.0.1) in the browser’s address bar.
- Use default credentials (found in the manual) to log in.
- Once logged in, tweak settings as needed.
- Find the reset button on the extender. It’s often a small hole labelled Reset.
- Insert a paperclip or a pin into the reset hole. Press and hold the reset button for about 10 seconds.
- Release the reset button when the extender’s lights start flashing or as indicated in the user manual.
- Allow the extender to reboot. This may take a minute or two.
- After the reset, you’ll need to set up your extender again, following the initial setup steps in the manual.
NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is app setupusa.online.